Rako RLED45CC1 45W constant voltage Wireless LED dimmer Module with in-built RF receiver
search
  • Rako RLED45CC1 45W constant voltage Wireless LED dimmer Module with in-built RF receiver

Rako RLED45CC1 45W constant voltage Wireless LED dimmer Module with in-built RF receiver

£178.80
Tax included
£149.00 Tax excl.

Rako RLED45CC1 45W constant voltage Wireless LED dimmer Module with in-built RF receiver

Wireless single channel 45w constant current dimming module. Up to 13 LEDs can be connected in series to a maximum of 45w. Selectable outputs of 350, 500, 600, 700 and 1000mA with a forward voltage range of 3-45V DC. Requires a suitable external power supply such as the Rako RAPSU48.

Quantity

Ask a Quote

Rako RLED45CC1 45W constant voltage Wireless LED dimmer Module with in-built RF receiver

 

A 45W constant current LED dimmer with in-built RF receiver and Rako processor for constant current LED fittings. Selectable outputs of 350, 500, 600, 700 and 1000mA with a forward voltage range of 3-45V DC. The RLED45CC1 is fed from a suitable DC power supply to provide an adequate forward voltage, Rako recommends the RAPSU48. The module is connected in-line before the first fitting and can control up to 13 LEDs in series (note: some fittings may use multiple LEDs, if in doubt refer to Rako's technical department) with a maximum wattage of 45W. Controlled from any Rako Rakom device, e.g. RCM wall plates or Bridge interface units.Wireless single channel 45w constant current dimming module. Up to 13 LEDs can be connected in series to a maximum of 45w. Selectable outputs of 350, 500, 600, 700 and 1000mA with a forward voltage range of 3-45V DC. Requires a suitable external power supply such as the Rako RAPSU48.

A 45W constant current LED dimmer with in-built RF receiver and Rako processor for constant current LED fittings. Selectable outputs of 350, 500, 600, 700 and 1000mA with a forward voltage range of 3-45V DC. The RLED45CC1 is fed from a suitable DC power supply to provide an adequate forward voltage, Rako recommends the RAPSU48.

The module is connected in-line before the first fitting and can control up to 13 LEDs in series (note: some fittings may use multiple LEDs, if in doubt refer to Rako's technical department) with a maximum wattage of 45W.

Controlled from any Rako Rakom device, e.g. RCM wall plates or Bridge interface units.

RLED45CC1

Data sheet

Condition
new
Availability
preorder
Manufacturer
Rako

Specific References

EAN13
3413179405618
Comments (0)
No customer reviews for the moment.