Set of 8Pcs of LED 8 Pixel Strip Bars 1m with flat milky diffusers with Controller

Set of 8Pcs of LED 8 Pixel Strip Bars 1m with flat milky diffusers

System includes 8 LED strips, a controller and eight 5-meter long XLR extension cables. The new LED Panel strip can control leach strip's 8 individual RGB sections, along with the corresponding dimmer and strobe settings. The controller supports ArtNet protocol, which facilitates the use of device while operating in the full RGB mode (192CH mode).

It has updated color presets and built-in color flows for use of horizontal and vertical directions which are accessible via DMX (in 6CH, 8CH, 14CH, 24CH, 26CH, 50CH, 96CH, 112CH, 192CH, 208CH channel modes). Because of the exact same hardware design.

Specifications
Strips Length: 100cm
Sections: 8
Cable length: 75cm
Connection: 5pin
XLR male connector
LED system: 5050 RGB
Rigging: M10 sliding profile
Dimensions: 1000 x 30 x 50 mm
Weight: 0,7 Kg
IP Rating: IP-20
Controller Input voltage: 100~240VAC, 50/60Hz
Power consumption: 90W at full output
On Board: Display Modes: DMX, Auto, Sound, Manual

Control protocol: DMX-512, Artnet LED Mode: 5m0cm / 100cm Control personality: 6Ch, 8Ch, 14Ch, 24Ch, 26Ch, 50Ch, 96Ch, 112Ch 192Ch, 208Ch

Color: Black
Housing: Metal
Outputs: 5p XLR female
Max cable length: 6m
Data connections: XLR 3p & RJ-45
Power connections: Pro power in- & output
Dimensions: 360 x 200 x 95 mm
Weight: 2,3 Kg
Certification: CE
Max. ambient temp: 40°