Synergy 2160 16 button controller on dual gang panel, with UK psu
The Synergy 2160 is an 16 button controller mounted on a UK 2 gang white metal panel. Ideal for basic control of projectors, plasma and LCD's displays via RS232, IR or both.
Two bi-directional RS232 ports give control over projectors, displays and other RS232 devices.
Two IR port supporting emitters for control of devices such as video players, receivers and amplifiers.
Two inputs, one which can be used with an external PIR sensor for room occupancy sensing, the second can be used to either lock the panel or power off the system.
Two outputs can be configured to control motorised screens, projector lifts, projector power switching or be controlled independently by any button.
Description The Synergy 2160 is a 16 button controller mounted on a UK 2 gang white metal panel. Ideal for basic control of projectors, plasma and LCD's displays via RS232, IR or both.
The Synergy 2160 may be programmed to access any available RS232 commands such as on, off, input select and volume, and with multifunction buttons one press can establish a series of events for seamless operation and timed events such as projector shut down.
It has two infrared outputs to control peripheral equipment.
Two outputs are also provided for control of external relays or indicators for screen control etc. It also has two external inputs for use with an external switch or a PIR detector for additional control functions or shutdown.
With the additional EtherLink 232, this unit can link direct into a Ethernet backbone. This will give control of multiple other devices as well as control of the Synergy 2160 over Ethernet via your LAN / WAN network or even over the Internet.
Power supply included. UK supplied normally or add "/EU" to order code for European supply.
Please Note: This unit is programmed using the Podflow 3 software and not the Synergy software
This unit can be upgraded to use the Podnet protocol. This will allow the Synergy 2160 to connect to other Podule control units.
Specification Hardware devices 16 x Push Buttons fitted with Green LED's 2 x Bi-directional RS232 Port 2 x Digital Inputs 2 x Open collector outputs 2 x Infra-red Outputs
Software devices 8 x Timers 16 x Logic Gates 16 x Flip-Flops 24 x RS232 input messages 64 x RS232 output messages 32 x Infra-red output messages
Power requirements 12V DC, 210mA @ 12V. Size = 146mm x 85mm, depth = 25mm ( 44mm back box recommended ) Net weight = 220g