JBL JRX225 Live Portable Passive Speaker JRX200 Series Each

JRX225

Dual 15" Two-Way Sound Reinforcement Loudspeaker System
The JRX225 is a portable, dual fifteen-inch, two-way speaker system designed specifically for applications in live music performance and music playback.

FEATURES:

• Dual JBL low frequency drivers with a 64 mm (2.5 in) diameter edgewound ribbon voice coil which provides more crosssectional wire area in the voice coil gap than round wire designs, for greater efficiency and power handling.
• JBL 2414H-C 25 mm (1 in) polymer diaphragm compression driver improves high frequency performance as well as system reliability.
• The advanced network topology crossover design shapes frequency response and delivers coherent summation in the crossover region.
• A "Quasi 3-Way" design offers the extra bass for which a dual fifteen system is designed, but without sacrificing performance in the critical mid-range. The upper woofer produces mid-frequencies and bass, while the lower woofer concentrates on bass only. The reduction in mid-range phase cancellation greatly improves midrange sound quality and coverage.
• High-voltage capacitors and inductors with massive cores and heavy gauge wire enable the crossover network to handle high power without saturating.
• Progressive Transition high frequency waveguide provides superior coverage control, reduced distortion, and smoother frequency response.
• The rugged, acoustically superior enclosure is constructed from 19 mm (.75 in) MDF (Medium Density Fiberboard) using advanced adhesives and mechanical fastener technology for extreme durability and improved low-frequency performance.
• SonicGuard protects the highfrequency driver from excess power without interrupting the performance.
• Non-resonant, all-steel handles are used.
• Attractive 18-gauge perforated, steel grille protects components from damage.

SPECIFICATIONS:

• Power Rating - 500 W / 2000 W
• Frequency Range (-10 dB) - 42 Hz - 18 kHz
• Frequency Response (±3 dB) - 62 Hz - 13 kHz
• Sensitivity (@1m) - 100 dB SPL (1w/1m)
• Nominal Impedance - 4 ohms
• Recommended Amplifier Power - 500 W to 1000 W into 4 ohms
• Maximum SPL - 133 dB
• Nominal Dispersion - 90º x 50º
• Crossover Frequency - 2.2 kHz
• Dimensions (H x W x D) - 1092 mm x 464 mm x 426 mm (43 in x 18.3 in x 16.8 in)
• Weight - 42.6 kg (94 lb)
• High Frequency Driver - JBL 2414H-C , 1" exit compression driver mounted on Progressive Transition Waveguide
• Low Frequency Driver - JBL M115-8A x 2
• Input Connectors - Neutrik Speakon NL-4 (x1); .25 in TS phone jack (x1); parallel