Optoma HQView520
search
  • Optoma HQView520
  • Optoma HQView520

Optoma HQView520

£5,197.99
Tax included
£4,331.66 Tax excl.

Optoma HQView520

  • Edge blending and warping
  • Ultra low latency
  • Black level adjust
  • Inputs include 3G-SDI & HD-SDI

Quantity

Ask a Quote

Optoma HQView520

  • Edge blending and warping
  • Ultra low latency
  • Black level adjust
  • Inputs include 3G-SDI & HD-SDI
HQView520 Universal HQV Scaler–Switcher-Scan Converter with Warp, Edge Blend & 3G-SDI In/Out - Use as a routing switcher and universal interface for 3G-SDI, HD-SDI, DVI or HDMI.

Optoma have worked in partnership with Calibre to produce special versions of Calibre’s edge blending and warping products optimised for use with our ProScene projectors. This unique collaboration significantly reduces the complexity and configuration time required to edge blend multiple ProScene projectors and is covered by the industry leading ProScene technical support services should you require assistance with your edge blending project.

Edge blending explained

Some applications call for an image that is brighter and higher resolution than can be provided by one projector. In this situation a single image can be created from multiple projectors but unless done well the image will show visible bands where the projected images overlap

Edge-blending technology solves this problem by eliminating the visible banding and creating a single bright, high resolution image across the screen.

Edge blending multiple projectors in an array makes it possible to create very bright, high-resolution very wide projection displays. By using the HQView320 or HQView520 you can precisely control multiple, edge-blended images seamlessly, quickly and easily.

Designed with the end-user applications in mind, the HQView320/520 let you expertly edge-blend multiple, curved images seamlessly, on all four sides, for an unlimited number of projectors. Precisely control edge-blended images and warp displays to fit almost any projection surface – flat or curved.

The Optoma Advantage

Traditionally blending solutions are time-consuming and complicated to set up with many incompatibilities between blending solutions and projectors. The Optoma blending solution removes this issue. Each Optoma ProAV projector model has been painstakingly tested with the HQView320/520 and a series of optimised presets developed that greatly reduces the complexity and time required to setup blending projects.

If you do require help with your blending project, uniquely, the industry leading Optoma ProAv support team is on hand to support your complete blending project – the blending boxes and the projectors as a single system. This greatly simplifies the support process for you and enables us to assist you get your blending projects back on track quickly and efficiently.

For more than ten years Optoma has been one of the world’s foremost projector designers and manufacturers - amongst the very few companies that focus exclusively on projectors.

Today the Optoma range represents the evolution of projection expertise, honed and refined by manufacturing and supporting millions of projectors the world over. This knowledge and skill has been distilled into our products and support services which are designed specifically for demanding professional applications.

  • Higher education
  • Lecture theatres
  • Houses of worship
  • Museums
  • Conference rooms
  • Digital signage
  • Stage shows
  • Live events
  • Projection mapping
  • Auditoriums
  • Boardrooms
  • Broadcast studios
  • Large classrooms
  • Exhibitions
  • Meeting rooms
  • Post production
  • Theatre
  • Trade shows

Harnessing the power of the ReonTM video processor from IDT, running state of the art HQV algorithms with expertly designed hardware and firmware from Calibre, HQView520 is a highly flexible image scaler and scan converter which provides stunning image quality for professional, broadcast and corporate AV users.

HQview520 features 4-sided soft edge blend for seamless blending of multiple projectors and includes flexible geometry correction functions able to correct image shape and projector misalignment by dragging and dropping each image corner, or by pin/barrel, rotation or by keystone and rotation.

Full warp mapping is also supported by HQView520. A PC application is included for easy warp map creation or third-party generated warp maps can also be processed from automatic image alignment systems making HQView520 ideal for dual overlaid projector alignment in 3D systems.

HQView520 has 3G-SDI input and out connectivity with backwards compatibility with HDSDI and SDSDI. A Genlock input is provided for studio/staging, compatible with bi or tri-level sync or black & burst.

  • Best in class professional image processing in a compact affordable 1U format
  • Use as a routing switcher and universal interface for 3G-SDI, HD-SDI, DVI or HDMI switching and distribution systems, projectors and displays
  • Improve video image quality with better detail and clarity
  • Superior de-interlacing reduces image flicker and artefacts
  • Remove picture noise from poor quality video sources
  • Powerful geometry correction for off-axis projection, pin/barrel, image rotation
  • 4-Sided soft edge blend for tiling multiple projectors to produce large images
  • Flexible warp mapping for curved screen projection, simulation and 3D alignment
  • Genlock and I/O Lock for in-camera and edge blend use
  • 3G-SDI, HDMI, DVI, VGA Analog, Component YPbPr, RGsB/RGBS, Composite & S-Video inputs with signal compatibility up to 1080p & WUXGA
  • 3G-SDI, HDMI/DVI & VGA Analog outputs
  • Motion adaptive per pixel video de-interlacing, HD & SD
  • Multi-directional diagonal de-interlace filter
  • Automatic 3:2 & 2:2 pull-down detection with automatic film, video and video over film detection
  • Chroma and Luma transient improvement
  • Edge anti-aliasing
  • 4-field full resolution SD & HD processing
  • 4D Motion, Noise Adaptive HQV noise reduction for spatial and temporal noise
  • Codec noise reduction for mosquito and block compression noise
  • Direct input selection keys allow input selection without using menu system
  • Flexible color calibration controls
  • Gamma controls
  • 10-bit signal inputs, 12-bit accurate internal processing
  • Selectable processing versus latency: best picture and low latency modes
  • Latency as low as 0.25-frame progressive inputs, 1.25-frames interlaced inputs
  • I/O Lock, Genlock/Frame Sync and Free Run selectable output modes
  • Flicker filter for interlaced output modes
  • USB port for in-field firmware updates
  • TCP/IP remote control and Web Server
  • Easy to navigate self-explanatory OSD menus
  • Powerful geometry correction capabilities
  • Pan, Zoom, Tilt
  • Image rotation, pin/barrel correction
  • 4-Sided soft edge blend
  • Flexible warp mapping



Inputs

2x Composite Video CVBS (NTSC, PAL & SECAM),

1x via BNC jack and 1x via Cinch/RCA

1x YC/S-Video via 4 pin mini DIN

1x Component analog video YPbPr(S) or RGsB/RGBS via 3 or 4 x BNC jack

1x HDMI with HDCP, 8/10/12 bit video compatible, 10-bit internal processing depth. Audio strip-off of SPDIF compatible formats

1x DVI with HDCP

1x VGA Analog via 15HDD

1 x 3G-SDI, accepts 3G, HD and SD SDI signals via BNC supports 4:2:2 and 4:4:4 formats with audio de-embed

1x Genlock (V-Lock) input via BNC, accepts bi-level, tri-level sync or black & burst, 50/59.94/60Hz formats

Supported video formats:

HD 720p, 1080i, 1080psf (psf digital only), 1080p23.97/24/25/30, 1080p30, 1080p50, 1080p59.94, 1080p60

ED 480p, 576p (not via SDI)

SD 625i (576i), 525i (480i)

Common VESA graphics formats from 640x480 to 1920x1200 (with reduced blanking for 1920x1200 and 1600x1200 modes)

Multi standard support for CVBS & YC in PAL, NTSC, SECAM formats with selectable 3D comb for composite

Note: PIP and edge blend are mutually exclusive so cannot be used simultaneously

Outputs

1x 3G-SDI

1x DVI/HDMI with HDCP (HDMI with deep color 8/10/12 bit support, via DVI connector)

1x VGA Analog via 15HDD

1x S/PDIF digital audio via RCA

NB: 3G-SDI and VGA Analog outputs are disabled with HDCPencrypted input. Not all outputs are available simultaneously

Supported Output formats:

DVI/VGA common VESA formats 640x480 to 1920x1200, 720p, 1080p

3G-SDI in SMPTE formats 480i, 576i, 720p, 1080i, 1080p with selectable audio embed

Selectable Genlock (V-Lock), I/O lock or frame rate conversion mode

Selectable aspect ratio conversion

Selectable vertical temporal filter for flicker reduction of interlaced outputs (edge blend not available in this mode)

User Controls

Remote control via RS232, TCP/IP API and Web Server.

PC-based Warp Map Generator tool

Keypad for direct input selection and control of common adjustments as well as OSD menu access.

USB port for uploading software updates and new features

Power Requirements

100-264VAC, 35W typical

Warranty

3-years return to base warranty covers parts and labor, shipping excluded.

HQVIEW520

Data sheet

Price Unit
Each
Condition
new
Availability
preorder
Brand
Optoma
Manufacturer
Optoma
Colour
Black

Specific References

EAN13
5060059047123
Comments (0)
No customer reviews for the moment.