JBL Control 29AV-1 (White) Each
search
  • JBL Control 29AV-1 (White) Each

JBL Control 29AV-1 (White) Each

£708.00
Tax included
£590.00 Tax excl.

Control 29AV-1

Premium Indoor / Outdoor Monitor Speaker
The Control 29AV-1 provides improved voicing for extremely flat, high fidelity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker.

Quantity

Control 29AV-1
control_29av_1_wht.jpg

Premium Indoor / Outdoor Monitor Speaker
The Control 29AV-1 provides improved voicing for extremely flat, high fidelity performance, extended bandwidth and well-controlled defined coverage from a compact loudspeaker.

FEATURES:

  • Extended bandwidth, extremely smooth frequency response.
  • 110° x 85° HF coverage, rotatable horn.
  • 110 W transformer for 70 V or 100 V lines, with 8 W thru.
  • SonicGuard overload protection.
  • 200 mm (8 in) Kevlar cone woofer, 
  • 25 mm (1 in) titanium diaphragm compression driver.
  • Includes InvisiBall mounting hardware, plus ten 6 mm attachment points for suspension and optional U-bracket.
  • Sealed input panel cover and screwdown input terminals.

SPECIFICATIONS:

  • Frequency Range - 37 Hz –18 kHz (-10 dB)
  • Power Capacity - 300 W Continuous Program Power; 150 W Continuous Pink Noise
  • Transformer Taps - 70 V: 110 W, 55 W, 28 W & 14 W 100 V: 110 W, 55 W, & 28 W, Thru Position: 8 ohms nominal
  • Frequency Response - 45 Hz – 18 kHz ( ± 3 dB)
  • Maximum SPL @ 1m - Short-Term: 120 dB; Long-Term: 114 dB
  • Nominal Sensitivity - 90 dB (2.83V / 1m)
  • Nominal Coverage Angle - 110° H x 85° V, rotatable
  • Directivity Factor (Q) - 7.2 dB, averaged 500 Hz to 16 kHz
  • Directivity Index (DI) - 8.6 dB, averaged 500 Hz to 16 kHz
  • Nominal Impedance - 8 ohms
  • Minimum Impedance - 6.3 ohms @ 230 Hz
  • Crossover Network - 3rd order High Pass, 2nd order Low Pass with impedance compensation, 2.5 kHz crossover frequency
  • Low Frequency - 200 (8 in) kevlar cone with pure butyl rubber surround, 50 mm (2 in) voicecoil on fiberglass former
  • High Frequency - 25 mm (1 in) compression driver, pure titanium diaphragm with patented JBL diamond surround
  • Enclosure Material - High impact polystyrene
  • Grille - Thermoset composite coated steel, WeatherMax multi-layer foam
  • Overload Protection - Full-range power limiting to protect network and transducers. Serviceable internal fuse to protect during exceptional overload conditions.
  • Environmental - IEC 529 IP-X5 rating. Exceeds Mil Spec 810 for humidity, salt spray, temperature & UV. Passes Mil-Std-202F for salt spray.
  • Terminations - Screw-down terminal strip, zinc plated copper base, nickel plated metal screws/washers. Accepts up to 9 mm outside 4 mm inside open lug (#6, #8 or #10 lug), plus bare wire (up to 12 AWG/2.5 mm2).
  • Safety Agency Rating - Transformer is listed per UL1876
  • Colors - Black or white (-WH)
  • Dimensions (H x W x D) - 520 x 306 x 277 mm (20.5 x 12.0 x 10.9 in.)
  • Net Weight (ea) - 12.2 kg (26.8 lb.)
  • Shipping Weight (ea) - 14.0 kg (30.8 lb.)
  • Included Accessories - 1 pc MTC-PC2 input panel cover, InvisiBall mounting base, 6 mm x 260 mm InvisiBall Hex wrench.
  • Optional Accessories - MTC-29CM to install speaker down from the ceiling MTC-29UB U-bracket
JBL0632

Data sheet

Condition
new
Availability
preorder
Manufacturer
JBL

Specific References

UPC
050036903394
Comments (0)
No customer reviews for the moment.