SGA-40 20 watt per channel stereo amplifier in a 50mm Euro format

SGA-40 20 watt per channel stereo amplifier in a 50mm Euro format

The Single Gang Amplifier (SGA-40) is the ideal audio video solution for small and medium
size rooms.

Key Features

• Cost effective
• Energy efficient
• Easy to specify
• Easy to install
• Bandwidth: 20Hz to 22KHz +/- 1dB
• Low 0.1% THD + noise & 70dB SNR
• 10/20 watts stereo

Description
The SGA-40 is a 20 watt per channel stereo wall and dado mounting amplifier. It is ideal for multi-room audio, classroom, hotel bedroom and small meeting room applications.

It is manufactured in the 50mm euro format and supplied complete with a UK size white mounting frame. Alternative frames are available in a wide range of finishes from iKON AVS as well as multiple switch plate manufacturers.

The SGA-40 fits a standard UK single back box and requires only a 35mm depth. It will also fit the single DIN back box.

It uses an 86% efficient class D design and has a RMS output of 20 watts per channel into 8 Ohms when powered from an 18V power supply or 10 watts when powered by the included 12V power supply, and as most quality loudspeakers are 8 Ohms, maximum efficiency is assured.

Additionally the amplifier adopts an ultra low power standby state when no signal is present.

It is fitted with two rear inputs on screw terminals for permanent connections and two 3.5mm stereo jacks on the front panel for other sources making the SGA-40 easy to install & use.

What sets the SGA-40 apart is the fact it is designed with the European market in mind and offers an ultra reliable and affordable amplifier.

To further simplify installation the unit can be supplied bundled with compatible speakers and cables.

Specification
Power Output - 12V Stereo Mode 10W RMS* per channel into 8 Ohms
Power Output - 15V Stereo Mode 20W RMS* per channel into 8 Ohms
Bandwidth - 20Hz to 22KHz +/- 1dB
THD & Noise - 0.1% THD +noise & 70dB SNR
Gain - 26dBu
Coupling - Input: AC; Output DC.
Minimum input for full power -6dB
Protection - Integral, auto resetting, current limit& thermal protection. ntegrated click & pop suppression
Power Source - 12V DC @ 2.5A ( supplied ) or 18V DC @ 3.5A
Power Connector - 2.1mm DC connector, centre
No signal current (12V) - 28mA
Standby current (12V) - 10mA

* The SGA-41 is a class D switching amplifier so the RMS values are RMS equivalent, this is that they give the same Sound Pressure Level using music or speech from a loudspeaker as a linear amplifier delivering the quoted RMS level.