It creates a link between volt-free relay, switch or PIR sensor outputs and Rako RF based receivers. The unit accepts 7 contact closures for scenes 1-4, off, raise and lower. When connected to a PIR sensor, the unit can be configured to enable and disable the PIR using an RCP RF wall plate or RAMB1 timeclock.
Needs 12V DC Supply or RAPSU
The RAVFR volt-free contact interface allows scene control from ordinary push switches, relays and PIR movement sensors. In factory default setting, the unit will select scenes 1-4, off and master raise & lower. When configured with the RASOFT programming software, it is possible to enable and disable switch inputs, select toggle mode and set PIR delay times.