LAST NEW PAIR JBL LSR4328P-PAK - Pair of LSR-4328P Nearfield Monitors with LSR4300 Mic Accessory Kit and Remote


New product

This is the last pair left. Highly sought after.
Inbuilt Room EQ Calibration System with RMC Mic
JBL LSR4328P is a robust (32.5 lbs.),
bi-amplified, 2-way studio monitor speakers
8" Neodymium woofers
1" silk dome tweeters with 150W and 70W amplifiers

More details

£ 3,600.00

£ 4,320.00 inc VAT

£ 4,320.00   tax incl.

Click to configure product options.

JBL 4328P Recording Auto Calibration Monitor Speaker System

These truly are the best speakers for a recording studio and it is the last pair available as new.

The LSR4328P features a uniquely ambitious front and rear panel set of tune and tone controls, that borders on the fanatical in sheer statistical density. We are now recording and mixing in some strange and wonderful places, and these places may foster and nurture the creative spirit, but for critical listening these places often need sound treatment, and it doesn't get done. And that is why JBL has stocked the LSR4328P with knobs,switches and a remote control - to help us get good mixes in poor acoustic environments.

Now, all of this compensation for room modes, nodes, and standing waves, in bright, boomy, dull, fluttery, boxy, cavernous rooms, and all the other environmental acoustic aberrations that can make mixing a sad experience, does not come cheaply. But, the LSR4328P is designed very much for an age where a lot of music is recorded outside of the "proper" recording studio, and this speaker provides a certain reassurance that no matter where, and how strange, the space you're working in really is, you can fix it in the mix.

Magnetically shielded bi-amplified nearfield monitors for project or commercial recording and mixing
Advanced Linear Spatial Reference design for flat off-axis response and greater clarity at the mix position
RMC(TM) Room Mode Correction provides electronic control of room modes, "tunes" speaker to acoustic characteristics of recording and mixing space
HiQnet(TM) Network Protocol enables multi-speaker, multi-room system-wide control of level, EQ, input selection and other general speaker functions
Wireless Remote control and LSR4300 Control Center software enables remote control from listening position
31-segment dBFS front panel LED meter and setting display with -70dBFS to 0dBFS scale plus CLIP
5 rear panel LED indicators for active input and digital stream selection
Integrated 150-watt LF, 70-watt HF speaker-matched bi-amplification with factory calibrated sensitivities
1" silk dome tweeter with Elliptical Oblate Spheroidal waveguide for precise pattern control
8" woofer with efficient Neodymium magnet and 2" voice coil
24-bit/96kHz digital inputs and processing with AES and SPDIF Digital I/O's
Balanced XLR and 1/4" TRS Analog inputs
Magnetically shielded for close-proximity use with computer and video monitors
Reinforced enclosure and mounting points for installation, integral handles for simplified positioning

JBL 4328P Specs

Low Frequency Driver 8" Polymer-coated paper fiber Woofer with Neodymium Magnet and 2" voice coil
Mid Frequency Driver No
High Frequency Driver 1" Silk Dome Tweeter with Neodymium magnet and shielded integral heat sink
LF Amplifier 150 Watts
HF Amplifier 70 Watts
Crossover Digital 2.2 kHz, 8th order LR(LF)/3rd order BW(HF)
Frequency Range 50 Hz - 20 kHz, +/-1.5dB
LF Extension: 
-3dB: 43Hz - 22kHz
-10dB: 35 Hz - 32 kHz
Impedance XLR In: 10kOhms
TRS In: 20 kOhms(Bal/Unbal)
Maximum Sound Pressure Level (SPL) 118dB SPL @ 1m (pair)
112dB SPL @ 1m (individual)
Controls and Indicators Front Panel:
10 x On/Solo/RMC/EQ On/LF/HF/Preset/Input/+/- Controls
Rear Panel: 8 x Speaker ID Stereo and Surround DIP Switches
1 x +4dBu/-10dBv Input Sensitivity Switch
Connectors 1 x 3-pin XLR Female In, Balanced
1 x 1/4" TRS In, Bal/Unbal
1 x 3-pin XLR Female AES Digital In
1 x 3-pin XLR Male AES Digital Out
2 x Coaxial SPDIF In/Out
1 x 1/8" Mini +15V RMC Mic In
1 x USB Port
2 x RJ45 HiQ-net(TM)Data Port I/O
Shielded Yes
Dimensions (HxWxD) 10.53 x 17.25 x 10.6" (236 x 438 x 269)
Weight 32.5 lb (15 kg)
Specialties RMC Room Mode Correction System Software
Analog and Digital Inputs
HiQ-net(TM) Networking
Packaging Info
Package Weight 82.0 lb
Box Dimensions (LxWxH) 30.0 x 24.0 x 16.0"

Customer Service - Contact us

Akwill Limited
493-295 Chester Rd.
M16 9HF
+44(0)161 872 7337