For use with Akwil LED NEON Flex or LED Strips 12V/24V/120V/240V
2 x 12 Digit LCD Display, shows system status
DMX digitally addressable setting and power off protection
Two working modes: DMX Mode and Independant Mode
Compatible with DMX512 signals, from DMX 512 Consoles, Programmers or Computers
DMX Dimmable and Independently Dimmable
2 Year Warranty
LED-DECODER-D6PWM
LED DMX-PWM Decoder for LED-PX03W-12MM controls LED RGB DMX Pixels
The D6PWM LED Decoder Drives LEDs and converts a 512DMX Signal into a PWM Signal, 6 channels Maximum 6A Current each channel
For use with the LED-PX03W-12MM pixel ribbons.
Controls 256 gray levels for each colour.
For
The Akwil AV LED DMX 512 Controller can utilise the LED Pixel Tubes and Pendants for Colour Fading, scipping, scanning, and chasing, as well as both Flash and Video Displays.
DMX512 protocol,AC sychrounously,
can
The MADRIX LUNA 16 reliably distributes DMX512 data over long or short distances using Ethernet network or USB.
The exclusive MADRIX Sync Mode makes sure that lighting effects look their best on the LEDs.
The MADRIX USB one allows you to control 512 DMX channels using the MADRIX® software. Mainly used for DMX input, an additional MADRIX KEY (a software license) is required for DMX output.
DMX-IN/OUT With 5-Pin NEUTRIK XLR Port
USB 2.0 Standard
Power Over USB
High Quality
Hot Swapping & Plug and Play
Remote Control
Frame Rate Stability
Active USB
Working Temperature: -20 -60℃
Voltage: 3V(2*AAA Battery) / DC3.3V
Transmission Frequency: 2400-2483.5MHz
Modulation Method: GFSK
Transmitting Power: 6dBm
Control Distance: 30m
Standby Power: 30A
Panel Size: 106*146*20mm
• Calendar function
• 18 programmable scenes/chases
• Optional IR remote to trigger scenes/chases
• 3.5 Jack for external IR sensor (not incl.)
• Mini-DIN for external contacts
• Optical isolation at DMX output
• DMX input for external fader desks
The MADRIX LUNA 4 reliably distributes DMX512 data over long or short distances using Ethernet network or USB.
The exclusive MADRIX Sync Mode makes sure that lighting effects look their best on the LEDs.
Questions?
Do you have a question about one or more of our Akwil LED Controllers and Drivers products? Click below to contact us.