8 Channel modular dimming rack motherboard.
8 individual channel's with optional WMT-400, WML-300, WDA-600, WMS-600 & WMS-CUB control cards
(Select in configurator)
Stackable with other RAK8 units utilising RAK-STAR
Use RAK-LINK to connect to other Rako Wireless Devices.
Use RAMPI-USB to Program via PC
A pluggable module for use with the RAK8-MB to control motorised curtains, screens and blinds, providing open, stop, close functionality.
A wired connection unit for use with RAK4 dimmer units, with a power supply for wired CAT5 products. The power supply has the capability of powering 32 RAKOM devices, up to 1000m over standard CAT5e cable.
The RAK-STAR distribution unit allows the Home Run wiring to be achieved.
In Home Wiring scheme all Wall Plates and other devices can be wired back to a central position.
Designed to be the gateway between Rako transmitter devices and the RAK-4 range of dimmer racks.Can only be configured using the Rako RASOFT PC programming software.
Rako WSR-DLI Digital Addressable Lighting Interface compatible with EN62386 for a Rako Wired Network
The WSR-DLI is a wired control module with outputs to control 15 channels of addressable DLI fittings in a single Rako Room
The WAVFR must be connected to A RAKO Wired System. The simplest method is by connecting the RJ11 patch lead from the WAVFT to one of the RJ11 sockets on a system RAK-Link or RAK-Star.
WAVMI must be connected to A RAKO Wired System. The simplest method is by connecting the RJ11 patch lead from the WAVMI to one of the RJ11 sockets on a system RAK-Link or RAK-Star.
The WP-Con unit is mounted on a standard 86mm2 plate with 2 screws fixings to fit a standard 35mm deep single gang UK backbox.
The WK-CONNECT is mounted in a plastic box with cable strain relief clamps and is designed for ceiling or cupboard mounted appliances.
The WAPIR motion detector module allows scenes to be selected automatically via movement. In factory default setting, the unit will select scene 1 and off, with a timeout of 5 minutes.
Wireless ethernet HUB for interfacing with Rako wireless system components.
Desktop design or wall mountable with bracket included. Includes a 365 day calendar for automated scene scheduling, holiday simulation modes, macros/sequences, conditional mapping and other advanced functions.
Network interface for Rako wired systems with built in cloud services interface, time and advanced programming features.
The WK-HUB provides the link between Rako’s wired and wireless networks retransmitting all commands, both wired and wireless.
Designed to be connected to the Rako Rakom wired network via an RJ11 socket and control up to 15 channels of DMX512 compatible controllers or light fittings.
Rako RSR-DMX wireless 15 channel DMX controller for DMX controlled LED and other DMX light fixtures such as colour changing LED drivers and fibre optic projectors.
Do you have a question about one or more of our Modular Range WIRED Rack Lighting System Controllers and Centrally Mounted RAK Dimmers products? Click below to contact us.