JBL Control 50S/T (White) Speaker Each
search
  • JBL Control 50S/T (White) Speaker Each

JBL Control 50S/T (White) Speaker Each

£570.00
Tax included
£475.00 Tax excl.

Control 50S/T

Surface-Mount Subwoofer for Subwoofer-Satellite 
Loudspeaker System
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low  frequency response.

Quantity

Control 50S/T

Surface-Mount Subwoofer for Subwoofer-Satellite 
Loudspeaker System
The 150 Watt (600 Watt peak) Control 50S/T subwoofer contains a high-power, long-excursion, 200 mm (8 inch) driver which features an extremely robust high-mass cone for extended low frequency response, a 38 mm (1.5 in) 4-layer copper voice coil for high motor strength, an aluminum former for good transient response, and a rubber half roll surround for enhanced bass performance.

FEATURES:

  • Full bandwidth 32 Hz – 20 kHz high fidelity sound
  • Selectable 70V/100V for distributed lines, or low impedance
  • Versatility for either two or four satellite speakers per system
  • Available in black or white

SPECIFICATIONS:

  • Frequency Range (-10 dB) - 32 Hz – 200 Hz
  • Frequency Response (±3 dB) - 50 Hz – 150 Hz
  • Power Capacity - 300 Watts Continuous Program Power (2 hrs), 150 Watts Continuous Pink Noise (2 hrs), 200 Watts Continuous Program Power (100 hrs) and 100 Watts Continuous Pink Noise (100 hrs)
  • Nominal Sensitivity (2.83V, 1m) - 95 dB (near corner), 89 dB (center of wall)
  • Rated Maximum SPL (1m) - 115 dB average, 121 dB peak (near corner) and 109 dB average, 115 dB peak (center of wall)
  • Nominal Impedance - 8 ohms (in bypass/thru mode)
  • Transformer Taps - 80W, 40W, 20W, (& 10W @ 70V), 8 ohm bypass/thru
  • Transducer Driver - 200 mm (8 in) with polypropylene cone, butyl rubber surround, 38 mm (1.5 in) 4-layer copper-clad coil, vented aluminum former
  • Input Connectors - Six removable locking 2-pin connectors with screw-down terminals. Max wire 12 AWG (2.5 mm2)
  • Material - Top, bottom, front & bottom: Structural plywood. Port & terminal panels: MDF. Grille: Painted zinc-plated metal.
  • Dimensions (H x W x D) - Cabinet: 356 x 391 x 203 mm (14.0 x 15.4 x 8.0 in) and Wall Bracket: 15 mm (0.6 in) deep
  • Wall Bracket - 2.3 mm (0.9 in) thick zinc-plated and painted cold-rolled steel
  • Net Weight - 9.0 kg (20 lbs)
  • Shipping Weight - 10.2 kg (23 lbs)
  • Included Accessories - Wall bracket (both speaker and wall parts) with 4 pcs M6 screws to attach to speaker, terminal cover, 6 pcs 2-pin locking connectors and M6 screw for safety lanyard attachment.
JBL0879

Data sheet

Condition
new
Availability
preorder
Manufacturer
JBL

Specific References

UPC
050036905244
Comments (0)
No customer reviews for the moment.