JBL Control 85M In-ground 100V Line Speaker

JBL Control 85M

Two-way 5.25" coaxial mushroom landscape speaker. 80W Pink Noise Power Handling (160W program) in direct 8 setting, plus built-in 30W 70V/100V multi-tap transformer. Tough polyethylene highly weather resistant enclosure. Fully isolated center chamber for wiring protection. High fidelity sound character with broad frequency range of 55Hz - 18kHz.

Features

• Components:
  • 5¼” highly weather-resistant driver
  • ¾” soft-dome highly weather-resistant tweeter
• 80W Pink Noise Power Handling (160W program) in direct 8Ώ setting, plus built-in 30W 70V/100V multi-tap transformer
• Tough polyethylene highly weather resistant enclosure
• Fully isolated center chamber for wiring protection
• High fidelity sound character with broad frequency range of 55Hz - 18kHz

Specifications 

Frequency Response (-10dB) - 55 Hz – 18 kHz
Power Rating - 160 W Continuous Program (2 hrs)
                        80 W (320W peak), Continuous Pink Noise (2 hrs)
                        45 W (180W peak) Continuous Pink Noise (100 hrs)
Transformer Taps - 70V: 30W, 15W, 7.5W & 3.8W
                              100V: 30W, 15W, 7.5W
Frequency Response (±3 dB) - 65Hz - 16 kHz
Maximum Input Voltage - 23.3 V
Sensitivity - 86 dB, 1W @ 1m (ave. 80Hz - 16kHz)
Nominal Coverage Angle - 360° horizontal, 160° vertical (primary listening 10° to 50° up from                                                  ground).
Directivity (Q) - 2.2
Directivity Index (DI) - 3.4 dB
Maximum SPL - 105 dB @ 1m
Nominal Impedance - 8Ω (at 8Ω setting)
Insertion Loss - <1.0 dB at any tap setting
Thru Setting - 8Ω nominal
Crossover Type - 2nd Order LPF on LF and 2nd Order HPF on HF
Recommended Protective - High-Pass 65 Hz for 8Ω operation, 24 dB/oct
                                           60 Hz for 30W tap, 24 dB/oct
                                           50 Hz for 15W, 7,5W, and 3.7W taps, 24 dB/oct
Low Frequency Driver - 135 mm (5.25 in) diameter LF driver, Kapton™ former, 35.5mm (1.4 in)                                              voice coil, polypropylene cone and polyurethane surround.
High Frequency - 19mm (0.75 in) diameter HF driver Polyetherimide (PEI) dome.
Enclosure Material - LDPE Polyethylene plastic, 6 mm wall thickness, UL94V-0 rate

Grille - Powder coated stainless steel.
Environmental - IP-55 rating per IEC529 (dust protected and protected against jets of water).                                     Exceeds MilSpec 810 for humidity, salt spray, temperature & UV. Passes Mil-STd-                               202F for salt spray. Enclosure UL94V0 rated.
Agency Ratings - UL1480, Transformer UL Recognized per UL1876, ROHS compliant.
Terminals - Bare wire with dielectric-gel-filled wire nuts (internal to top speaker section).
Wiring - Water ingress protected by two stages of gland nuts, one mounted on outside of enclosure                   (installed by installer via drilling 22 mm (0.875 in, 7/8 in) hole in any of multiple provided                   locations) and one between the bottom base and top speaker sections. Included gland nuts                 require round-jacketed wire with outside diameter between 4.0 mm and 9.0 mm (0.16” in                  and 0.35” in). For installation instructions see Installation Guide (# IS C80MLS).
Colors - Hunter Green, RAL6018
Dimensions (H x W x D) - 432 x 291 x 291mm (17 x 11.5 x 11.5 in.)
Net Weight - 5.5 kg (12 lb)
Shipping Weight - 7.3 kg (16 lb)
Included Accessories - (2) wire nuts, (2) gland nuts, (1) right-angle screwdriver
                                    Installer-Supplied Required Tools 22mm (0.875 in, 7/8 in) twist-type drill bit                                       (or other type suitable for plastic) for installing gland nut into enclosure.