JBL Control 16C-VA Pair
search
  • JBL Control 16C-VA Pair

JBL Control 16C-VA Pair

£480.00
Tax included
£400.00 Tax excl.

JBL Control 16C-VA

Control 16C-VA is a full-range, EN54-24 certified ceiling speaker consisting of a 6.5" high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5VB flammability-rated material,

Quantity

JBL Control 16C-VA

Control 16C-VA is a full-range, EN54-24 certified ceiling speaker consisting of a 6.5" high tech cone driver and a 19 mm soft-dome liquid cooled tweeter mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5VB flammability-rated material, with a pre-attached blind-mount back-can for quick and easy installation. Combined 70V/100V and low impedance direct operation. 50 Watts at 8 nominal setting. 30W multi-tap at 70V/100V. 62Hz – 20 kHz bandwidth with 110° coverage.

FEATURES:

  • Components:
    • 165 mm (6.5 in) high output driver with polypropylene cone and butyl rubber surround
    • 19 mm (0.75 in) soft-dome liquid-cooled tweeter
  • EN54-24 Compliant
  • Blind-mount backcan for quick and easy install
  • Combined 70V/100V and low impedance direct operation
    • 50 Watts at 8Ω nominal setting
    • 30W multi-tap at 70V/100V
  • 62 Hz – 20 kHz bandwidth with wide 110° coverage
  • High 91 dB sensitivity for high maximum SPL

SPECIFICATIONS:

Frequency Range (-10 dB) - 62 Hz – 20 kHz
Frequency Response (±3 dB) - 96 Hz – 15 kHz
Power Capacity (at low-Z) - Power Capacity (at low-Z)2: 100 Watts Continuous Program Power 
                                            50 Watts Continuous Pink Noise
Rated Noise Power - 30W (30W tap)
Rated Noise Voltage - 70V/100V (with 70V/100V tap settings)
Nominal Sensitivity - 91 dB: 8 ohm tap
EN54 Sensitivity (@ 4m) - 77 dB (per EN54-24 spectrum and measurement conditions at 4 meters).
Coverage Pattern - 110° conical coverage (1 kHz - 16 kHz)
Coverage Angels
(by Frequency)
Conical (Vertical & Horizontal) - 500 Hz: 180°
                                                  1000 Hz: 160°
                                                  2000 Hz: 155°
                                                  4000 Hz: 92°
Reference Axis - Specification and measurement reference is directly on-axis vertically and                                         horizontally, directly below the speaker as speaker it is installed in the horizontal                               ceiling plane
Directivity Factor (Q) - 7.8
Directivity Index (DI) - 8.2 dB
Rated Maximum SPL - 108 dB @ 1 m (3.3 ft) average, 116 dB peak
EN54 Max SPL (@ 4m)91 dB (per EN54-24 spectrum and measurement conditions, 30W tap, at 4                                        meters)
Nominal Impedance - 8 ohms (in direct/bypass 8 ohm setting); EN54 nominal impedance 7 ohms                                       (based on min Z of 5.7 ohms at 11.2 kHz) 
                                  3.8W@70V; 7.5W@100V Tap: 1333Ω 
                                  7.5W@70V; 15W@100V Tap: 667Ω 
                                  15W@70V; 30W@100V Tap: 333Ω 
                                  30W@70V; N/C@100V Tap: 166Ω
Transformer Taps - 30W, 15W, 7.5W @ 70V or 100V (plus 3.8W @ 70V only)
Fuse - Thermal Fuse, open temperature 152 degrees C, Rating >= 10A @ 250VAC
LF Driver - 165 mm (6.5 inch) with polypropylene cone, butyl rubber surround, anodized aluminum                      voice coil former, high temperature voice coil

HF Driver19 mm (3/4 in), highly-damped treated-silk dome, Kapton™ voice coil, liquid cooling, wide                  dispersion waveguide
Connections - Input +, Input -, Earth (connected to backcan). Ceramic with brass inserts (3.2                                 mm/0.126 in opening), accommodates 2.5 sq mm / 12 AWG wire
Gland Nut/Strain Relief - Accommodates round jacketed cables 4.0 mm (0.16 in) through 9.0 mm                                           (0.36 in)
Materials - ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan
Safety Agency - EN54-24:2008 certified Type A (Certificate No. 0359-CPR-00485); Compliant with                                BS5839/8; UL1480, UL2043, NFPA90 & NFPA70; Suitable for use in air handling                                  spaces, Signaling Speaker; rated IP-21 per IEC529/60529; Transformer UL                                        registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and                         UL94-5VB flammability rating; In accordance with IEC60849/ EN60849 systems
Dimensions (H x W x D) - 253 mm diameter x 262 mm from back of baffle to back of gland nut                                               (10.0 in diameter x 10.3 in in depth)
Ceiling Cutout Size - Circular cutout with 223 mm (8.8 in) diameter (cardboard cutout template                                          included)
Ceiling Thickness Range - Up to 38 mm (1.5 in) with stock dog-ears. MTC-TCD thickceiling dog-ears                                         available for up to 60 mm (2.4 in) ceiling thicknesses
Safety Seismic Attachment - One point, top surface
Net Weight - 3.4 kg (7.4 lbs, one speaker)
Shipping Weight - 11.2 kg (24.7 lbs, pair in master carton)
Included Accessories - C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile                                             spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile                                     spans), cutout template, paint shield, grille
Optional Accessories - MTC-16WG high humidity grille 
                                    MTC-26NC new construction bracket 
                                    MTC-26MR mud-ring construction bracket 
                                    MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 60 mm (2.4 in,                                       ordering one set = 24 dogears for 6 speakers) 
                                    MTC-48TR tile rail for 1200 mm (4 ft) tile spans

JBL1714

Data sheet

Price Unit
Each
Condition
new
Availability
preorder
Brand
JBL
Manufacturer
JBL
Colour
White

Specific References

EAN13
0050036904575
Comments (0)
No customer reviews for the moment.