JBL Control 12C-VA Each
search
  • JBL Control 12C-VA Each

JBL Control 12C-VA Pair

£312.00
Tax included
£260.00 Tax excl.

JBL Control 12C-VA

Control 12C-VA is a full-range, EN54-24 certified ceiling speaker consisting of a 3" full-range driver mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5VB flammability-rated material, with a pre-attached blind-mount back-can for quick and easy installation.

Quantity

JBL Control 12C-VA

Control 12C-VA is a full-range, EN54-24 certified ceiling speaker consisting of a 3" full-range driver mounted in a vented, paintable baffle made of UV resistant UL94-V0 and UL94-5VB flammability-rated material, with a pre-attached blind-mount back-can for quick and easy installation. Combined 70V/100V and low impedance direct operation. 20 Watts at 8 nominal setting. 15W multi-tap at 70V/100V. 68Hz – 70kHz bandwidth with 130° coverage.

FEATURES:

  • 76 mm (3 in) full-range driver
  • EN54-24 Compliant
  • Blind-mount backcan for quick and easy install
  • Combined 70V/100V and low impedance direct operation
    • 20 Watts at 8Ω nominal setting
    • 15W multi-tap at 70V/100V
  • 68 Hz – 17 kHz bandwidth with wide 130° coverage

SPECIFICATIONS:

Frequency Range (-10 dB) - 68 Hz – 17 kHz
Frequency Response (±3 dB) - 95 Hz – 15 kHz
Power Capacity (at low-Z) - 40 Watts Continuous Program Power
                                            20 Watts Continuous Pink Noise
Rated Noise Power - 15W (15W tap)
Rated Noise Voltage - 70V/100V (with 70V/100V tap settings)
Nominal Sensitivity - 84 dB: 8 ohm tap
EN54 Sensitivity (@ 4m) - 72 dB (per EN54-24 spectrum and measurement conditions at 4 meters.)
Coverage Pattern - 130° conical coverage (1 kHz - 16 kHz)
Coverage Angels
(by Frequency)
Conical (Vertical & Horizontal) - 500 Hz: 180°
                                                  1000 Hz: 175°
                                                  2000 Hz: 170°
                                                  4000 Hz: 160°
Reference Axis - Specification and measurement reference is directly on-axis vertically and                                         horizontally, directly below the speaker as speaker it is installed in the horizontal                               ceiling plane
Directivity Factor (Q) - 9.8
Directivity Index (DI) - 7.4 dB
Rated Maximum SPL - 97 dB @ 1 m (3.3 ft) average, 103 dB peak
EN54 Max SPL - (@ 4m) 84 dB (per EN54-24 spectrum and measurement 15W tap, at 4 meters)
Nominal Impedance - 8 ohms (in direct/bypass 8Ω setting)
                                  1.9W@70V; 3.8W@100V Tap: 2667Ω
                                  3.8W@70V; 7.5W@100V Tap: 1333Ω
                                  7.5W@70V; 15W@100V Tap: 667Ω
                                  15W@70V; N/C@100V Tap: 333Ω
Transformer Taps - 15W, 7.5W, 3.8W @ 70V or 100V (plus 1.9W @ 70V only)
Fuse - Thermal Fuse, open temperature 152 degrees C, Rating >= 10A @ 250VAC
Driver - 76 mm (3 inch) with polypropylene cone, butyl rubber surround, anodized aluminum voice                 coil former, high temperature voice coil
Connections - Input +, Input -, Earth (connected to backcan). Ceramic block with brass inserts (3.2                         mm/0.126 in opening), accommodates 2.5 sq mm / 12 AWG wire.
Gland Nut/Strain Relief - Accommodates round jacketed cables 4.0 mm (0.16 in) through 9.0 mm                                           (0.36 in)
Materials - ABS baffle with UL94-V0 and UL94-5VB flame class fire rating; Zinc-plated steel backcan
Safety Agency - EN54-24:2008 certified Type A (Certificate No. 0359-CPR-00485); Compliant with                                BS5839/8; UL1480, UL2043, NFPA90 & NFPA70; Suitable for use in air handling                                  spaces, Signaling Speaker; rated IP-21 per IEC529/60529; Transformer UL                                        registered per UL1876; ROHS, C-tick N108, CE compliant; Baffle meets UL94-V0 and                          UL94-5VB flammability rating; In accordance with IEC60849/ EN60849 systems
Dimensions (H x W x D) - 196 mm diameter x 174 mm from back of baffle to back of gland nut (7.7                                          in diameter x 6.9 in in depth)
Ceiling Cutout Size - Circular cutout with 170 mm (6.7 in) diameter (cardboard cutout template                                          included)
Ceiling Thickness Range - Up to 35 mm (1.4 in) with stock dog-ears. MTC-TCD thickceiling dog-ears                                          available for up to 55 mm (2.2 in) ceiling thicknesses
Safety Seismic Attachment - One point, top surface
Net Weight - 1.6 kg (3.5 lbs, one speaker)
Shipping Weight - 6.7 kg (14.7 lbs, pair in master carton)
Included Accessories - C-ring support backing plate, 2 tile support rails (for 2 ft or 600 mm tile                                             spans; optional MTC-48TR extension available for larger 4 ft or 1200 mm tile                                     spans), cutout template, paint shield, grille
Optional Accessories - MTC-12WG high humidity grille
                                    MTC-24NC new construction bracket
                                    MTC-24MR mud-ring construction bracket
                                    MTC-TCD thick-ceiling dog-ears for ceiling thicknesses up to 55 mm (2.2 in,                                       ordering one set = 24 dogears for 8 speakers)
                                   MTC-48TR tile rail for 1200 mm (4 ft) tile spans

JBL1712

Data sheet

Price Unit
Each
Condition
new
Availability
preorder
Brand
JBL
Manufacturer
JBL
Colour
White

Specific References

EAN13
0050036904537
Comments (0)
No customer reviews for the moment.